Precautions should be taken before the installation of the gear reducer motor

The gear reducer is an external meshing involute helical cylindrical gear reducer produced according to the professional standard zbj1900.Gear reducer is a kind of rotating mechanism widely used in tower crane machinery in the eastern part of our country.It is widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical industry, textiles, printing and dyeing, medicine and other fields.Gear reducer motors generally achieve the purpose of deceleration by engaging large gears on the output shaft of the gear reducer motor, that is, the internal combustion engine, or other high-speed power through the gear and a small number of teeth on the input shaft of the gear reducer motor.The following is a small editor for you to introduce the precautions before the installation of the gear reducer. I hope it will be of some help to you.

Before installing the reducer, you must first check the nameplate requirements of the reducer, and then install it to see if the power supply meets the requirements.Check whether the geared motor and reducer are in good condition.There shall be no oil, acid, alkali, harmful gases, steam, radioactivity and other substances in the working environment.When the transmission part is installed on the output shaft, hammer impact is not allowed.The assembly fixture and the internal thread of the shaft end are usually bolted to compress the transmission parts.Otherwise, it may cause damage to the internal part of the reducer.It is recommended not to use steel fixed joints.Due to the improper installation of this coupling, it will cause unnecessary additional load, cause early bearing damage, and even break the output shaft.A large number of reverse drives cannot be applied to gear reducers (self-locking).