Cause and solution of motor resistance failure of cycloid needle wheel reducer

The failure of the resistance of the gear reducer is mainly due to poor welding quality；
Wire material, operation, and the following winding faults, rewinding coil technology, electromagnetic wire specifications, winding connection, wire fracture and other reasons will cause the resistance failure of the gear reducer motor.First, the specifications of the electromagnetic wire of the cylindrical gear reducer
The thickness of the electromagnetic wire is uneven, one section is qualified, and a certain section is unqualified.

Second, the connection of the winding of the cylindrical gear reducer
1. The connection of the winding element is wrong.
2. The connection and lead leads of the gear reducer do not meet the requirements.Check the connection law of the winding components, correct the connection law, and correct the wrong components.Check the connection line, lead length, specifications and cross-section.

Third, the motor winding failure of cylindrical gear reducer
1. The winding of the gear reducer motor has an inter-turn short circuit fault.
2. There are two or more contacts between the winding and the chassis, resulting in a ground fault.